Mike Bullock, builttolast@shawneelink.com of Eddyville, Illinois, U.S.A.
"Here is a nitestand I made recently. It's made of solid white oak and the back is tongue and groove. The plans called for 1/4" plywood, but I didn't like that so I put a little extra effort into it.
I just used Minwax satin polyurethane finish (no stain first)."
This is his table/cabinet with raised panel door and his description of this unique project.
"I bought a Grizzly shaper and the cutters to make raised panels, and just to try it out I made one panel. It turned out to be the door of the table. I then decided to make the rest of the table, so I wouldn't have a useless panel laying around. The table top is a copy of an old bread board I found in my wife's grandmother's basement."
"It's made out of solid red oak. This project was made from some old rough sawn oak boards from a local saw mill that went under, which my step father had in a shed, so the cost was next to nothing. I put 3 coats of Minwax polyurethane on it, but no stain.
Everything was done off the top of my head, so I don't have any drawings."
To E-Mail the project maker, please click this button above!
To return to the Thumbnail Directory page of our Visitor's Projects, please click on BACK. To return to the Main Directory page for Grampa's Workshop, please click on HOME. Or to send us an E-mail, please click on EMAIL.
Email
Webmaster
In an attempt to decrease the spam I get, my
email address is
no longer clickable but instead is shown as an image in the box
below.
If you wish to email me, please record the address below and email me there.
