Projects of Randy Bush

Randy Bush bbwood@telenet.net of Long Lake, New York USA has sent in a shot of his "Harley"! Randy describes his unique project below.

"I got the plans from Cherry Tree. The tools required are: a scrollsaw, router with 3/8" round-over bit, and a 1" belt sander is nice to make the handle bars - you'll need a 1x12x10 clear pine board. After you cut the parts out and round them over, try to sand as much as you can before you screw & glue it together. Do not leave any sharp edges any where, as little people will find a way to get hurt on them!

I cut little sponges to apply the cherry stain, and they worked well, getting into all the nooks and crannies. Use a satin finish. I sprayed this one, but a good brush will work fine.

Just keep looking for the runs on both sides as you go. This project will take 16-20 hours your first time and there are no short cuts to quality. Just remember the little person that rocks in it today will be giving it to their kids someday."

"I sell them for $250.00."

To E-Mail the project maker, please click this button above!

To return to the Thumbnail Directory page of our Visitor's Projects, please click on BACK. To return to the Main Directory page for Grampa's Workshop, please click on HOME. Or to send us an E-mail, please click on EMAIL.

Email Webmaster
In an attempt to decrease the spam I get, my email address is
no longer clickable but instead is shown as an image in the box below.

If you wish to email me, please record the address below and email me there.