Projects of Jack Walden

These are projects from Jack Walden Mrjw03@wmconnect.com of Sacramento, Ca., USA, and he tells us about it below.

"This was a first for me.  I took this old cabinet that I have had around for 15 years and turned it into a miter saw table. I took the top off and found that the top and sides and back were beveled at 45'. I set my circular saw at 45' and cut the sides and back to the height I wanted the table. Then I cut a cut-out for the saw in the top. I then installed a shelf in the box, adjusting the height so the saw would be flush with the table top. Finally I reinstalled the top and put the saw into the cut-out. I put a couple of blocks of wood on the shelf to support the table top at the cut-out.

I think it turned out very well, for a first time project."

Here's the progression of Jack's work in turning his old cabinet into a very functional mitersaw table, proving once again,,, never discard anything! ;-)

To E-Mail the project maker, please click this button above!

To return to the Thumbnail Directory page of our Visitor's Projects, please click on BACK. To return to the Main Directory page for Grampa's Workshop, please click on HOME.

Email Webmaster
In an attempt to decrease the spam I get, my email address is
no longer clickable but instead is shown as an image in the box below.

If you wish to email me, please record the address below and email me there.